Aastra 6700i Series - User Interface Features; Shifting of Softkey Positions for Busy States

Additional Information
RN-001037-02 REV03 – 06.2011 10
Shifting of Softkey Positions for Busy States
Administrators can shift the softkey position for busy states using the “collapsed con-
text user softkey screen” parameter. If this parameter is configured, user program-
mable softkeys 1 and 2 on the 6755i, 6757i, 6757iCT, 9480i, and 9480iCT phones will
appear on page 1 in position 4 and 5 during the following states:
• outgoing
• ringing
• connected
• hold
If there are more than two softkeys, the phone will still show the “More” key and then
show softkey 3 on the next page in position 1.
For Example:
During a call with this parameter disabled (Example 1), softkeys 1 (Park) and 2 (DND)
do not appear on page 1. The user has to press the More key to access them on page
2.
During a call with the “collapsed context user softkey screen” parameter enabled
(Example 2), Park and DND appear on page 1 in position 4 and 5.
User Interface Features
Note:
The phone defined context-sensitive softkeys (including empty/unassigned keys)
will remain in the same location. As a result, some screens may only show 1 addi-
tional softkey (e.g. softkey 1).