Additional Information
RN-001037-02 REV03 – 06.2011 16
When a user presses the “Redial” key, the mapped number will be sent out as DTMF
during an active call if the current “map redial key to” parameter is configured to a
number and the “map redial as dtmf” parameter is set to “1”.
When a user presses the “Conf” key, the mapped number will be sent out as DTMF
during an active call if the current “map conf key to” parameter is configured to a
number and “map conf as dtmf” parameter is set to “1”
Configuring for Sending of DTMF with Remapped Redial and Conf Keys
Use the following parameters to configure the remapping of the “Redial” and “Conf”
keys:
Parameter–
map redial as dtmf
Configuration Files aastra.cfg, <mac>.cfg
Description Allows the phone to send the stored number as DTMF using the
phone configured DTMF method when the “Redial” key is pressed.
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example map redial as dtmf:1
Parameter–
map conf as dtmf
Configuration Files aastra.cfg, <mac>.cfg
Description Allows the phone to send the stored number as DTMF using the
phone configured DTMF method when the “Conf” key is pressed.
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example map conf as dtmf: 1
To Next Page
Loading...
