Aastra 9417CW User Manual

11
SuperFlash
†
The SuperFlash feature allows either of two telephone extensions to activate the link to a
Call Waiting call. When a person at either extension presses ˚, both extensions
switch to and speak with the Call Waiting caller as shown in the diagrams below.
Calls will not be disconnected when you press ˚. If you wish to return to your first
caller press ˚ again. The 9417CW and one other SuperFlash-compatible telephone
extension will switch between the two callers each time you press ˚. Once you have
switched to one caller by pressing ˚, you must wait three seconds before you can
switch back to the previous caller. When you press ˚ and see a caller’s Identification
information but only hear a dial tone, it means that the caller has hung up.
To end a call, ensure you can see that call’s identification information (you may have to
press ˚), then press ®.
Note: SuperFlash and Super Call Waiting Identification only work with SuperFlash and Super Call
Waiting Identification-compatible telephones.
†
You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.
Incoming caller's information
(Caller One) is displayed.
CALLER ONE
555-1234
CALLER ONE
555-1234
Extension telephone picks up
and also speaks with Caller One.
Extension
CALLER ONE
555-1234
Extension in use
>
Call Waiting tone sounds and Caller Two's
information is displayed on both extensions.
Extension
CALLER ONE
555-1234
CALLER TWO
555-5678
CALLER ONE
555-1234
CALLER TWO
555-5678
CALLER ONE
555-1234
Either telephone can press ˚
to speakwith Caller Two.
Both telephones speak to Caller Two
and see the displayed information.
CALLER ONE
555-1234
Extension
Caller Two
Either telephone can press ˚ again
to switch back to Caller One.
P0844339 04 E UG 9417CW Page 11 Thursday, April 20, 2000 11:09 AM

Aastra 9417CW Specifications

Power

power type	16 Vac transformer
voltage message waiting indicator	CLASS

Weight and Dimensions

weight	2.3 lbs
length	7.5”
width	7.5”
height	3.5”