Aastra M9316CW User Manual

20
Saving a feature and light in memory keys
You can make the set indicator light come on when you turn a feature on and go off when
you turn that same feature off. You can only do this with one feature, and the feature must
have separate On and Off codes (such as Call Forwarding).
For example, you may want the light to remind you that you have turned Call Forwarding
on. To do this, use one key to turn the indicator light on when you activate the feature. Use
the second key to turn the indicator light off when you deactivate that same feature. The
following procedure shows you how to program a FeatureLight On and Off key.
Using FeatureLight keys
To save a FeatureLight On key: To save a FeatureLight Off key:
1. Press
ß. Do NOT select a mem-
ory key yet.
1. Press ß. Do NOT select a mem-
ory key yet.
2. To program the light on, press
⁄. 2. To program the light off, press ‚.
3. Press the desired memory key. 3. Press the desired memory key.
4. Enter the telephone company feature
code for turning the feature on.
†
†
Note: Contact your telephone company for the appropriate feature codes.
4. Enter the telephone company feature
code for turning the feature off.†
5. Press ß. 5. Press
ß.
6. Read the display to confirm the num-
ber.
6. Read the display to confirm the num-
ber.
7. Label the memory key.
(See the diagram on page 18.)
7. Label the memory key.
(See the diagram on page 18.)
To turn a feature and light on or off:
1. Press the memory key where you stored the FeatureLight.
The display shows
FeatureLight ON or FeatureLight OFF.
2. Lift the handset or press either
© or ∂.
The feature and light turn on or off. (When the feature and light are on and you are
not using the telephone, the display shows
Feature ON as a reminder.)
P0857798 04 E UG 9316 Page 20 Wednesday, April 12, 2000 3:13 PM

Aastra M9316CW Specifications

General

Brand	Aastra
Model	M9316CW
Category	Telephone
Language	English