17
Deleting from the Callers List
Memory keys
Saving numbers and names in memory keys
You can save the numbers and names of your customers, business associates, or anyone
you call frequently in 9316CW’s eight memory keys. You can store more numbers and
names in the Directory. See the Directory on page 12 for more information.
Saving from the display into memory keys
To delete a number in the Callers List: To delete all numbers in the Callers List:
1. Press
≈. 1. Press ≈.
2. Use
ª to find the item you want
to delete.
2. Press ∑ twice.
3. Press
∑ twice.
You are still in the Callers List.
3. To leave the Callers List at any time,
press
≈ or ®.
4. To leave the Callers List at any time,
press
≈ or ®.
To save a number and name:
1. Press
ß.
2. Press the desired memory key.
3. Enter the number using the dial pad. You can enter a maximum of 24 digits.
Note: If you require a pause (for example, between a telephone number and an
access code), press
˙ where you want the pause. Each pause is 2 seconds.
4. Press
ß.
5. To skip the name, go to step 6. To enter a name, use the dial pad.
(See Entering Names on page 13.)
6. Press
ß.
7. Label the memory key. (See the diagram on page 18.)
To save from the display:
1. Ensure that a number is on the display. (For example, answer a call or make a call
using the dial pad, or use the Redial List or Callers List.)
2. Press
ß.
3. Press the desired memory key. If the name was displayed with the number, both are
now saved in the memory key.
4. If no name is displayed, you are prompted to enter one. If you do not want to enter a
name, go to step 5. To enter a name, use the dial pad. (See Entering Names on
page 13.)
5. Press
ß.
6. Label the memory key. (See the diagram,
Labeling the memory keys on page 18.)
P0857798 04 E UG 9316 Page 17 Wednesday, April 12, 2000 3:13 PM
To Next Page
Loading...
Need help?
General
