s-max sella · 160 kg
3 Assembly
With a few movements you can assemble the s-max sella by means of several
fixtures and tightening knobs. Disassembly is just as easy.
3.1 Handle/seat unit
F
The holding device has to be parallel to the housing.
F
Only authorized AAT dealer or an AAT representative are allowed to
adjust the holding device.
First connect the handle/seat unit with the climbing unit by inserting the co
-
lumn of the handle/seat unit (seat pointing forward) into the holding
device on the climbing unit.
A 9-pin Sub-D socket connector located in the climbing unit’s holding de
-
vice makes the electrical connection.
11
To Next Page
