EasyManua.ls Logo

AAT s-max sella - Operating the s-max sella; Capacity Limits, Battery Status, and Brake Checks; Roller Lining, Control Light, and Single Step Mode

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Operation
5.1 Maximum lifting capacity
Please make sure that the max. weight of the person of 160 kg is not excee
-
ded.
5.2 Battery pack
Please make sure that the sealed lead acid batteries are fully charged be
-
fore you use the s-max sella for the first time.
Extensive instructions you find in chapter 8.3.
5.3 Safety brakes
Before operating the s-max sella check the safety brakes every single time.
Extensive instructions you find in chapter 6.4
5.4 Rollers attached to the climber
Please check regularly whether the linings on both rollers attached to the
climber are intact.
You find further information in chapter 8.6
5.5 Control light and single step control
After turning on the device, the control light should light up and stay on.
Flashing of the control light indicates malfunction.
Further information on malfunction you find in chapter 6.1.5
The single step mode could be turned "ON" or "OFF" with the single step con-
trol.
19
s-max sella · 160 kg

Table of Contents

Other manuals for AAT s-max sella