EasyManua.ls Logo

AAT s-max sella - Battery Pack Installation and Removal

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Secure the connection with the tightening knob .
F
Please always make sure that the handle/seat unit is safely connec
-
ted to the climbing unit.
F
Please only connect the handle/seat unit with the climbing unit if
both parts are clean and dry. Should there be dirt or moisture the two
parts should never be connected.
F
Clean and dry the Sub-D socket connector with a regular cleaning
cloth.
F
You may not connect other devices to the Sub-D socket connector.
This could destroy the s-max sella or the other electrical devices.
3.2 Attach the battery pack
Push the battery pack sideways into the climbing unit; once connected it
is automatically locked.
3.3 Detach the battery pack
Push down the locking lever on the climbing unit and take out the battery
pack.
12
s-max sella · 160 kg
1
2
3

Table of Contents

Other manuals for AAT s-max sella