8.2.2 Voltage converter for your vehicle
The voltage converter does not need particular care or maintenance. Never
-
theless, check your voltage converter regularly and protect it from oil, grease,
aggressive cleaners, diluting agents and/or damage due to sharp edges, etc.
F
Before using the voltage converter, please read and follow all in
-
structions and warning notes included with the voltage converter.
F
Exclusively use the AAT Alber Antriebstechnik GmbH voltage con
-
verter!
F
Check the voltage converter regularly and protect it from oil, grease,
aggressive cleaning agents, thinners and/or damage by sharp edges,
etc.
F
Repairs and service check-ups may only be performed by AAT Alber
Antriebstechnik GmbH or their authorized personnel.
8.3 Battery pack
The battery pack’s sealed lead acid batteries should be recharged after each
use. Technical details for the sealed lead acid batteries you find in chapter
8.3.1.)
The battery pack is subject to a so-called self-discharge. Therefore, you
should connect the battery pack to the charger whenever possible. Due to the
fact that the battery pack automatically goes into charge retention as soon as
it is fully charged, an overcharge is impossible.
If your battery pack does not possess its full capacity yet, the reason may be
that a new battery pack reaches its full capacity only after several char-
ging/discharging cycles.
If fully charged batteries discharge more quickly as before, they are probably
used up. In such case, please have your authorized dealer check and replace
them, if necessary.
Tip:
F
If the s-max sella is at a standstill for some time, please connect it to
the charger to retain the charge. This does not damage the sealed
lead acid batteries, on the contrary, it increases their durability.
35
s-max sella · 160 kg
To Next Page
