AAT s-max sella - Battery Pack Charging Procedures

8.3.2 Charging the battery pack
F
Before charging, please read and follow all instructions and warning
notes included with the charger.
F
Please always turn off the s-max sella before you charge the
batteries!
F
Exclusively use the AAT Alber Antriebstechnik GmbH charger!
F
Never touch the plug with moist hands!
The battery pack may be charged either by means of the charging socket 
on the device or, if pulled out, by means of the battery pack's socket 
itself.
8.3.3 Charging with the automatic charger
1. Plug in the connector  of the automatic charger to the socket on
the s-max sella  or on the battery pack .
2. Plug in the connector  to the wall outlet and the batteries are being
charged.
The LED on the automatic charger indicates the charging process.
F
Should you charge the batteries while they remain attached to the
device, the latter cannot be used!
Signals of the charger
37
s-max sella · 160 kg
2
charger LED orange batteries are being charged
charger LED green batteries are fully charged, maintenance mode
1