TECHNICAL
- Time Code Off/On allows you to choose to insert (On) or nor
(Off) AatonCode information, which consists of Time, Date and
Equipment number ID.
- Font allows you to choose the font you need for the characters to
be inserted. Choose 1 for standard characters and 2 for bold charac-
ters.
- Automatic Power Off allows you to choose between an automatic
shut off ( On ) or a manual one (Off).
- Delay to power off allows you ( displayed only if the Automatic Po-
wer Off mode has been chose ) to choose an automatic shut off of the
video assist, from 10 to 60 minutes. Use arrows to proceed.
- Vitc Position allows you to choose the position of the Vitc lines.
Choose between line 10 and 19 in PAL (Aaton recommends line 19),
between 13 and 19 in NTSC.
- Parity allows you to select the parity of the Vitc lines between Odd
and Even.
Make sure that your Post-production tools run properly with the se-
lected value.
- Low camera Speed allows you to incease brightness and sharpness
in low camera speed mode ( from 3 to 12 fps).
- Burn-in White level allows you to modify the intensity of the whi-
te burn-in frame. You can choose from -100 ( almost grey ) to +50.
The medium position is 000. Use arrows to proceed.
52
To Next Page
Loading...