39
Technical Details
THE PROJECTOR DOES NOT TURN ON
Possible Causes Solution
Low battery Charge the projector until the battery is fully
charged (LED indicator on botton of unit show a
green light). Projector must be turned o while
charging.
There is no power. Check to ensure the power outlet source is good.
Check the Power Adapter/ USB Cable to
ensure a proper connection with the wall outlet or
computer as well as the projector. Ensure the
projector is o while charging.
The power button was not held long enough. To power on the projector, the power button
needs to be depressed for a full 3 seconds. try
holding the power button until the optical engine
turns on
Troubleshooting
To Next Page
Loading...
