How to make AB Inflatables ABJET Boat get on plane?
To ensure your AB Inflatables Boat gets on plane, distribute the load along the centerline, favoring the rear. Keep in mind the placement of heavy items like fuel tanks and diving bottles. Stow lighter equipment towards the aft. Also, regularly remove the hull drain plug when the boat is out of the water. Check the capacity plate to avoid overloading.
Why does tube pressure fluctuate in AB Inflatables Boat?
The tube pressure of your AB Inflatables Boat can fluctuate due to temperature changes. Pressure increases with prolonged sun exposure and decreases when launched or in darkness. This is normal. Ensure the plastic valve cap is fitted correctly, with one piece inside the buoyancy chamber and the other screwed on from the outside. If the valve is loose, consult the "Repair of the Tube" section.
General| Brand | AB Inflatables |
|---|---|
| Model | ABJET |
| Category | Boat |
| Language | English |
To Next Page
