EasyManua.ls Logo

AB Inflatables ABJET - Engine Specifications

AB Inflatables ABJET
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGINE SPECIFICATIONS
7
OEM with
Engine ROTAX® 1503 4-TEC, 4-stroke, Single Over Head
Camshaft (SOHC)
Number of Cylinders 3
Number of Valves 12
Maximum RPM 7300
Lubrication Dry sump (2 oil pumps). Replaceable oil lter.
Water-cooled oil cooler.
XPS Synthetic blend oil (summer grade).
3 L (3.2 qt (U.S. liq.)) Oil change w/lter.
4.5 L (4.8 qt (U.S. liq.)) total
Cooling System Closed loop cooling system.
Ethylene-glycol and distilled water (50%/50%).
5.5 L (5.8 qt (U.S. liq.)) total
Exhaust System Water cooled/water injected (opened loop).
Direct ow from jet pump
Jet Pump Axial ow single stage
Fuel Injection Type Multipoint Fuel Injection with intelligent Throttle Control (iTC).
Single Throttle body (60mm) with an integrated actuator.
Fuel Injector 3
Fuel Type Unleaded gasoline
Octane Rating (minimun) Inside North America: 87 (RON+ MON) /2
Fuel outside North America: 92 RON
This Engine is Four Stars -Super Ultra
Low Emission
The four-star label identies engines that meet the Air
Resources Board’s Stern-drive and Inboard marine engine
2009 exhaust emission standards. Personal Watercraft and
Outboard marine engines may also comply with these
standards. Engines meeting these standards have 90%
lower emissions than One Star – Low Emission engines.
For more information:
Cleaner Watercraft - Get the Facts
1 800 END-SMOG
www.arb.ca.gov
NOTICE
Never experiment with other fuels. The use of inadequate fuel can result
in boat performance deterioration and damage to critical parts in the
fuel system and engine components.
Engine Specications
KNOWING YOUR ABJET TENDER

Related product manuals