AB Inflatables ABJET - Abjet Certification

ABJET CERTIFICATION
CE Mark
All ABJETs have been granted the ocial right to stamp the
CE mark, which means ABJETs have met all requirements of
the updated Recreational Craft Directive RCD II 2013/53/ EU.
Standard(s) to which conformity is declared:
RCD II Guidelines & ISO 6185-3
Design Category
“C” Inshore: Craft designed for voyages in coastal waters, large
bays, estuaries, lakes and rivers, where conditions up to and
including wind force 6 (Beaufort Scale) and signicant wave
heights up to and including 2 meters (6,56 ft) may be experien-
ced.
Manufacturer´s Name: AB MARINE GROUP
Manufacturer’s Address:
Calle 1E N° 2 -15 Bodega N° 9, Zona Franca de Barranquilla,
Colombia. Phone: +57(5) 3795132
Fax: +57(5) 3795667
Certifying Body
HPi Verication services Ltd
EU Notied Body number: 1521
The Manor House, Hombery Park, Wallingford, OX10 8BA
United Kingdom
Web Site: www.hpivs.com
8
The CE mark allows us as manufacturer to perform a declara-
tion of conformity per boat when it is needed. Please contact
us if you need this certication or further information.
Standard(s) to which conformity is declared:
ABYC: American Boat & Yacht council
NMMA: National Marine Manufacturers Associa-
tion
231 S. La Salle Street. Suite 2050
Chicago, IL60604 U.S.A
Phone: (312) 946-6200
Web site: www.nmma.org
AB Inatables as NMMA Member
Means ABJET have met all requirements to which this boat
in NMMA certied.
ABJET 330 HPIVS/R1088-143-I-01 C 3 VII
HPIVS/R1088-144-I-01ABJET 380 C 3 VII
HPIVS/R1088-142-I-01ABJET 445 C 3 VII
MODELS CERTIFICATION
NUMBER
CE CAT ISO 6185 TYPE
ABJET Certication
KNOWING YOUR ABJET TENDER