31
Tuner configurations for connection with DiSEqC switch for 4 satellites:
Configuration Mode – advanced
Selected satellite – 19,2 ASTRA
LNB LNB 1
LNB convertor for Astra 19,2E is
connected to input 1 = A= AA of
DiSEqC switch.
DiSEqC mode - selected 1.0.
Commited DiSEqC command -
AA
Configuration for second satellite:
Selected satellite – 13E HOTBIRD
LNB LNB 2
LNB convertor for HotBird 13E
2E is connected to input 2 = B =
AB of DiSEqC switch.
DiSEqC mode - 1.0
Commited DiSEqC comm. – AB
Configuration for third satellite:
Selected satellite – 23,5E ASTRA3
LNB LNB 3
LNB convertor for ASTRA3 23 is
connected to input 3 = C = BA,
AB of DiSEqC switch..
DiSEqC mode - 1.0
Commited DiSEqC comm. – BA
Configuration for fourth satellite:
Selected satellite – 0,8W THOR
LNB LNB 4
LNB convertor for Thor 0,8W is
connected to input 4 = D = BB of
DiSEqC switch.
DiSEqC mode - 1.0
Commited DiSEqC comm. – BB
If you use switch with more then
four inputs, set up „DiSEqC mode“
parameter - 1.1.
To Next Page
Loading...
