61
VCR scart
Information
Service
(Menu – Information – Service)
VCR SCART connector provides
video signal only when video
resolution is set up on „576“
(PAL).
Use first right button at second
button line of the remote controller
to set up the video output.
Press EXIT to exit.
Service = information about actual received service.
About = hardware and firmware information.
Press RED function button to display information about actual running
service (channel).
Press GREEN function button to display PID information.
Press YELLOW function button to display information about the
transponder of actual service.
Press BLUE function button to display tuner status
To Next Page
Loading...
