Abatron BDI2000 - Initial configuration of the bdiGDB system

bdi
CW
BDM interface for CodeWarrior™ Debugger, BDI2000 (MPC5xx/8xx) User Manual 12
© Copyright 1992-2001 by ABATRON AG V 1.02
2.5 Installation of the Configuration Software
On the enclosed diskette you will find the BDI configuration software and the firmware required for
the BDI. Copy all these files to a directory on your hard disk.
The following files are on the diskette:
b20mpc.exe Configuration program
b20mpc.hlp Helpfile for the configuration program
b20mpc.cnt Help contents file
b20ppcfw.xxx Firmware for BDI2000 (Rev. A/B) for MPC8xx/MPC5xx targets
b21ppcfw.xxx Firmware for BDI2000 (Rev. C) for MPC8xx/MPC5xx targets
ppcjed20.xxx JEDEC file for the BDI logic device programming
bdiifc32.dll BDI Interface DLL
*.bdi Configuration Examples
Example of an installation process:
• Copy the entire contents of the enclosed diskette into a directory on the hard disk.
• You may create a new shortcut to the b20mpc.exe configuration program.
• Copy the BDI interface DLL to ...\CodeWarrior\Bin\Plugins\Support\Abatron\bdiifc32.dll