ABB 2600T EN Series User Manual

- 24 -
Specify location, environmental conditions, type of service and approximate number of operating hours or date of installation if known.
• OPERATING CONDITIONS
• REASON FOR RETURN
Trouble found during :
Customer
Purchase order No.
Plant
Name of person to contact
Instrument tag No.
Model
Serial No.
WARRANTY REPAIR REPAIR ORDER
• IDENTIFICATION
Rejection or discrepancy reports
Not availableCopy attached
Shipping information for the return of the equipment
Maintenance
Commissioning
Installation
On service
At start up
Please enclose this sheet duly completed to cover letter and packing list
Date
Signature Originator
Material returned for factory repair, should be sent to the nearest ABB Service Center, transportation charges prepaid by the Purchaser.
TROUBLE SHEET
• DANGEROUS FLUIDS
In case of toxic or otherwise dangerous process fluid, please attach the relevant Material Safety Data Sheet.

ABB 2600T EN Series Specifications

General

Accuracy	±0.075% of span
Process Temperature	-40 to 85 °C (-40 to 185 °F)
Ambient Temperature	-40 to 85 °C (-40 to 185 °F)
Power Supply	10.5 to 45 V DC
Housing Material	Aluminum or Stainless Steel
Type	Pressure Transmitter
Output Signal	4-20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus
Protection Rating	IP66, IP67
Measurement Type	Absolute, gauge, differential pressure
Stability	±0.1% of URL per year
Electrical Connection	M20x1.5, 1/2-14 NPT
Process Connection	1/2" NPT, 1/4" NPT
Certifications	ATEX, IECEx, CSA
Communication Protocol	HART, PROFIBUS PA, FOUNDATION Fieldbus