Need help?Do you have a question about the ABB 265GS and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | 265GS |
| Category | Transmitter |
| Language | English |
General notes, intended use, and technical limit values for safe operation.
Improper use, target groups, qualifications, and warranty provisions.
Explains name plate details, safety symbols, and warning indicators.
PED compliance, transport, storage, electrical installation, and maintenance safety.
Information on type-examination certificates and declarations of conformity for explosion-proof models.
Details for using intrinsic safety (Ex i) type of protection, including housing and circuit rules.
Guidelines for use in areas with combustible dust and in Zone 2 environments.
Information on flameproof enclosure (Ex d) and other ATEX protection types.
Details on CSA explosion-proof standards and Australian Ex/IP safety aspects.
Overview of the communication-ready digital pressure transmitters with microprocessor electronics.
Explains the modular structure, sensor types, and operation of the pressure transmitter.
General checks and considerations before installing the transmitter for optimal performance and safety.
Explains the IP rating and the meaning of the numbers in the designation.
Details mounting the transmitter and proper sealing for various connection types.
Guidelines for preventing moisture ingress and correctly installing impulse lines.
Information on establishing electrical connections using cable entries and conduits.
Describes the cable connection area, terminals, and gland installation for IP rating.
Details fieldbus connector types and the assembly of socket connectors.
Guidelines for grounding, protective conductors, and optional integrated lightning protection.
Details HART communication setup, connecting cables, and their requirements.
Specifics for connecting PROFIBUS PA transmitters, including voltage and shielding.
Procedures for putting the transmitter into operation after installation, including checks and valve actuation.
Configuring output signals and enabling/disabling write protection for parameters.
Procedures for setting the lower range limit and correcting zero shifts.
Rotating the electronics housing and installing/removing the button unit.
Installing the optional LCD display and securing the housing cover for Ex d designs.
Ensuring sensor ventilation and operating the transmitter using control buttons.
Details factory settings for HART, PROFIBUS PA, and FOUNDATION Fieldbus communication.
Outlines different methods for configuring parameters, with or without an LCD display.
Using the LCD display for configuration, including layout, symbols, and menu structure.
Configuring via handheld terminal, PC/laptop, or DTM, including specific parameter settings.
Electrical data and temperature limits for ATEX intrinsic safety (Ex ia) transmitters.
Specifications for ATEX Category 3 use in Zone 2, including non-sparking and protection by enclosure.
Electrical data, operating conditions, and temperature ranges for ATEX flameproof enclosure (Ex d).
Details on measuring ranges, spans, zero adjustment, damping, and operational readiness.
Specifies temperature limits for operation and storage, and pressure overpressure limits.
Covers environmental compatibility, electrical data for HART, PROFIBUS, and FF, and options.
Details measurement accuracy, dynamic response, and effects of operating influences.
Provides detailed mounting dimensions for various transmitter configurations and mounting brackets.
General information on maintenance requirements and return procedures for defective devices.
Steps for removing the electronics and process connection torques.
Information on CE marking and explosion protection approvals indicating compliance with directives.
To Next Page
