Installation and maintenance guide
1ZSC000563-ACD EN, REV. A, 2019-06-25
21
5. Tighten the four screws (5).
G001919
Torque
10 Nm
6.
Make sure that the O-ring seals correctly.
CAUTION!
An incorrect seal will cause water to
leak into the terminal box.
G006836
7.
Apply Mobilgrease 28 to the threads on the
cover (1), and then install the cover (1).
CAUTION!
Do not energize the bushing without
the cover (1) installed. The bushing is
grounded through the cover and this
prevents damage to the bushing.
G006822
End of instruction
To Next Page
Loading...
