Need help?Do you have a question about the ABB RETA-01 and is the answer not in the manual?
General| Manufacturer | ABB |
|---|---|
| Connection Type | Screw Terminals |
| Model | RETA-01 |
| Product Name | RETA-01 |
| Compatibility | ABB AC500 PLC |
| Material | Plastic |
| Color | Grey |
Provides a general overview of safety instructions.
Outlines critical safety precautions for electricians during installation and maintenance.
Identifies the target audience responsible for commissioning and using the module.
Lists prerequisites and necessary drive manuals for installation.
Summarizes the content covered in each section of the manual.
Defines key terminology used throughout the document for clarity.
Briefly describes the Modbus/TCP and EtherNet/IP network protocols supported.
Details the functionalities and capabilities of the RETA-01 Ethernet Adapter module.
Covers module compatibility with master stations and warranty information.
Introduces the steps for starting up the RETA-01 module.
Lists initial steps before module installation, like noting MAC ID.
Guides on the physical process of installing the module into the drive.
Provides instructions for connecting the Ethernet cable and related wiring.
Steps to configure the drive for communication.
Details the procedure for physically inserting and securing the module into the drive.
Advises on proper routing of network cables to avoid interference.
Explains how to physically connect the Ethernet network cable to the module.
Introduces the drive and module configuration for communication.
Details specific parameters for configuring the RETA-01 module and the drive.
Introduces the methods for configuring the RETA-01 network settings.
Describes the communication profiles used for network communication.
Explains how control commands are conveyed between master and drive.
Explains the ODVA AC/DC Drive Profile for controlling AC/DC drives.
Introduces the Modbus/TCP and EtherNet/IP messaging used for drive communication.
Explains the Modbus/TCP and EtherNet/IP protocols supported by the module.
Details Modbus/TCP communication, register mapping, and function codes.
Covers EtherNet/IP protocol, object modelling, and assembly objects.
Lists and describes various EtherNet/IP object classes and attributes.
Explains the meaning and function of the diagnostic LEDs on the RETA-01 module.
Provides enclosure, mounting, settings, and connector details for the module.
Details current consumption, lifetime, EMC, and Ethernet link parameters.
To Next Page
