Need help?Do you have a question about the ABB FENA-11 and is the answer not in the manual?
General| Product Type | Fieldbus Adapter |
|---|---|
| Series | FENA |
| Supply voltage | 24 V DC |
| Power consumption | 2.5 W |
| Degree of protection | IP20 |
| Connector Type | RJ45 |
| Flammability Rating | UL 94 V-0 |
| Type | Adapter |
| Operating Temperature | -25 to +70 °C |
| Fieldbus protocol | EtherNet/IP |
Explains warning symbols and their meaning for hazard prevention.
Provides instructions for safe installation and electrical work.
Details compatibility of FENA adapter module with various ABB drives and protocols.
Defines key terms and abbreviations used throughout the manual.
Details the step-by-step procedure for physically installing the adapter module into the drive.
Explains network cable types and jumper settings for shield connection.
Describes how to connect the network cable and create daisy chains.
Explains steps to configure drive for Modbus/TCP communication after installation.
Lists and describes parameters for Modbus/TCP Group A (Group 1).
Provides example settings for ACS355 drive with ABB Drives – Enhanced profile.
Details the Control word and Status word for ABB Drives communication profile.
Explains 16-bit/32-bit words for references and their scaling.
Details drive preparation for EtherNet/IP communication after installation.
Explains how to prepare the client for communication with the adapter module.
Details the ODVA AC/DC drive profile, its objects, services, and attributes.
Explains Control word and Status word for ABB Drives communication profile.
Describes the function of the adapter module's diagnostic LEDs for EtherNet/IP.
Details drive preparation for PROFINET IO communication.
Explains how to configure the master station for PROFINET IO communication.
Details Control word and Status word for PROFIdrive communication.
Describes the function of the adapter module's diagnostic LEDs for PROFINET IO.
Details technical specifications for the Ethernet link, including compatibility and topology.
Lists PROFIdrive parameters, their data types, and descriptions.
Details I&M records and the Call-REQ-PDU telegram for read/write access.
Explains how to modify IP configuration settings for adapter modules.
Describes how to access the FENA configuration web pages using IP address and credentials.
Explains how to modify parameter settings in configuration groups A, B, and C.
To Next Page
