Need help?Do you have a question about the ABB FEPL-02 Ethernet POWERLINK and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Type | Ethernet POWERLINK |
| Model | FEPL-02 |
| Manufacturer | ABB |
| Protocol | Ethernet POWERLINK |
| Operating Voltage | 24 V DC |
| Power Consumption | 3 W |
| Operating Temperature | 0 to +55 °C |
| Protection Class | IP20 |
| Mounting | DIN Rail |
| Ethernet Interface | 10/100 Mbps |
| Relative Humidity | 5% to 95%, non-condensing |
| Storage Temperature | -40 °C to +85 °C |
Provides critical safety instructions for installation procedures.
Details the adapter module's role and capabilities.
Illustrates the physical components and connections of the module.
Step-by-step guide for physically mounting the module onto the drive.
Provides instructions on cable management and connecting the module to the network.
Covers general drive preparation and network setup.
Details specific parameter settings for groups A, B, and C.
Provides detailed start-up steps for various ABB drive models.
Lists technical details of the adapter module like installation, environment, and connectors.
Provides technical details of the network link, including medium, topology, and transfer rate.
To Next Page
