14 About the manual
Compatibility
The FEPL-02 Ethernet POWERLINK adapter module is compatible
with different ABB drives and solar inverters.
•
ACS355
•
ACSM1
•
ACH580
•
ACS580
•
ACS850
•
ACQ810
•
ACS880.
The FEPL-02 Ethernet POWERLINK adapter module is compatible
with all master stations that support the Ethernet POWERLINK
protocol.
Note: The adapter module is compatible with more drives that may
not be listed here. For details of compatibility, check the drive’s
firmware manual.
Before you start
It is assumed that the drive is installed and ready to operate before
you start the installation of the adapter module.
In addition to conventional installation tools, have the drive
manuals available during the installation as they contain important
information not included in this manual. The drive manuals are
referred to at various points of this manual.
To Next Page
Loading...
