ABB FEPL-02 Ethernet POWERLINK - Nmt_Cs_Stopped

Communication protocol 95
NMT_CS_STOPPED
This state is used for the controlled shutdown of a selected CN
while the system is still running. In this state, the CN does not
participate in cyclic frame exchange, but it still observes SoA
frames.
NMT_GS_INITIALISATION
NMT_CS_NOT_ACTIVE
NMT_CS_PREOPERATIONAL_1
NMT_CS_PREOPERATIONAL_2
NMT_CS_READY_TO_OPERATE
NMT_CS_OPERATIONAL
NMT_CS_STOPPED
NMT_CS_BASIC_
ETHERNET
NMT_CS
NMT CN State Machine
NMT_CS_EPL_MODE
Error Condition
NMT StartNode
NMT StopNode
SoA, SoC