38 Start-up
FEPL-02 configuration parameters – group B (group 2)
Note: The actual parameter group number depends on the drive
type. Group B (group 2) corresponds to:
•
parameter group 55 in ACS355
•
parameter group 53 in ACSM1, ACS380, ACS580 and
ACS850
•
parameter group 53 in ACS880 if the adapter is installed as
fieldbus adapter A or group 56 if the adapter is installed as
fieldbus adapter B.
All parameters in this group are handled by the adapter module
automatically. Do not modify the settings of these parameters.
FEPL-02 configuration parameters – group C (group 3)
Note: The actual parameter group number depends on the drive
type. Group C (group 3) corresponds to:
•
parameter group 54 in ACS355
•
parameter group 52 in ACSM1, ACS380, ACS580 and
ACS850
•
parameter group 52 in ACS880 if the adapter is installed as
fieldbus adapter A or group 55 if the adapter is installed as
fieldbus adapter B.
All parameters in this group are handled by the adapter module
automatically. Do not modify the settings of these parameters.
To Next Page
Loading...
