Need help?Do you have a question about the ABB FPBA-01 and is the answer not in the manual?
General| Product type | Fieldbus Adapter |
|---|---|
| Supported fieldbus | PROFIBUS DP |
| Supply voltage | 24 V DC |
| Manufacturer | ABB |
| Model | FPBA-01 |
| Type | Fieldbus Adapter |
| Protection Class | IP20 |
| Current Rating | 100 mA |
| Humidity | 95% non-condensing |
| Weight | 0.2 kg |
Details essential safety precautions for electrical installation and maintenance.
Details the functionality and capabilities of the FPBA-01 module.
Details the initial steps for configuring the PLC with the FPBA-01 GSD file.
Covers physical installation and electrical connections for the FPBA-01 module.
Details activating the drive for communication and setting configuration parameters.
Explains how to insert and secure the FPBA-01 module in the drive.
Details the connector X1 pin allocation for the PROFIBUS connection.
Explains the requirement for bus termination to prevent signal reflections.
Covers preparing the drive for communication after installation.
Details preparing the master station with a GSD file for communication.
Describes the Control Word and Status Word for PROFIdrive.
Describes Control and Status Words for ABB Drives profile.
Explains parameter data transfer in cyclic communication.
Provides examples for transferring parameter data.
Illustrates the DP-V1 read/write service sequence for parameters.
Describes the function of the three diagnostic LEDs on the FPBA-01 module.
Lists specific parameters for the PROFIdrive profile.
To Next Page
