Introduction
13
Terms used in this manual
Communication Module
Communication Module is a name for a device (e.g. a fieldbus
adapter) through which the drive is connected to an external
communication network (e.g. a fieldbus). The communication with
the module is activated with a drive parameter.
FPBA-01 PROFIBUS DP Adapter module
The FPBA-01 PROFIBUS DP Adapter module is one of the
optional fieldbus adapter modules available for ABB drives. The
FPBA-01 is a device through which an ABB drive is connected to
a PROFIBUS network.
Parameter
A parameter is an operating instruction for the drive. Parameters
can be read and programmed with the drive control panel, or
through the FPBA-01 module.
Further information
Further information is available on the World Wide Web from
www.profibus.com.
Product and service inquiries
Address any inquiries about the product to your local ABB
representative, quoting the type code and serial number of the unit
in question. A listing of ABB sales, support and service contacts
can be found by navigating to www.abb.com/drives
and selecting
Sales, Support and Service network.
Product training
For information on ABB product training, navigate to
www.abb.com/drives
and select Training courses.
To Next Page
Loading...
Need help?
General
