ABB FPBA-01 - Quick start-up guide; Initial PLC Configuration

Quick start-up guide
19
Quick start-up guide
Overview
This chapter presents the steps to take during the start-up of the
FPBA-01 PROFIBUS DP Adapter Module with an ACS350,
ACSM1 or ACS850 drive. For more detailed information, see the
chapters Mechanical installation, Electrical installation, and Drive
configuration elsewhere in this manual.
WARNING! Follow the safety instructions given in this manual and
the Hardware Manual of the drive.
PLC configuration
• Install the FPBA-01 GSD file (e.g. ABB0959.GSD).