Need help?Do you have a question about the ABB FENA-01 and is the answer not in the manual?
General| Product type | Fieldbus Adapter |
|---|---|
| Supply voltage | 24 V DC |
| Power consumption | 2.5 W |
| Degree of protection | IP20 |
| Mounting | DIN rail |
| Category | Adapter |
| Compatibility | ABB drives |
| Supported fieldbus protocols | Ethernet/IP |
| Protocol | EtherNet/IP |
Essential safety instructions for installing or connecting the adapter module.
Explains the warning symbols used in the manual and how they indicate potential hazards.
Details compatibility of the FENA adapter module with different ABB drives.
Lists protocols supported by the FENA adapter module and compatible clients/masters.
Describes Ethernet standards, physical media, and topologies supported by the FENA module.
Introduces the FENA adapter module and its functionalities for connecting drives to Ethernet.
Provides step-by-step instructions for physically installing the adapter module into the drive.
Explains how to connect the network cable to the adapter module's RJ-45 connector.
Information on configuring the drive for operation with the adapter module.
Details configuration parameters for Modbus/TCP Group A, including FBA TYPE and PROTOCOL/PROFILE.
Explains ways of conveying control commands (Control word, Status word, references, actual values).
Details the Control word and Status word structure for the ABB Drives communication profile.
Information on configuring the drive for operation with the adapter module.
Details configuration parameters for EtherNet/IP Group A, including FBA TYPE and PROTOCOL/PROFILE.
Describes instances in ODVA AC/DC drive profile output assemblies for Run/Stop, Fault Reset, Net Ctrl, Net Ref.
Describes instances in ODVA AC/DC drive profile input assemblies for Faulted, Warning, Running, Ready, Ctrl From Net, Ref From Net.
Information on configuring the drive for operation with the adapter module.
Details configuration parameters for PROFINET IO Group A, including FBA TYPE and PROTOCOL/PROFILE.
Details Control word and Status word contents for the PROFIdrive communication profile.
Shows the enclosure layout and dimensions of the FENA adapter module.
Details technical specifications for the Ethernet link, including compatible devices, medium, and topology.
Lists and describes PROFIdrive parameters relevant to PROFINET IO communication.
Guides on using the tool to scan the network for FENA adapter modules.
Details how to modify the IP configuration settings of adapter modules.
Provides instructions for accessing the FENA configuration web pages via IP address and credentials.
Details how to modify parameter settings within configuration groups A, B, and C.
Instructs users to contact local ABB representatives for product inquiries.
Directs users to the ABB Document Library for manuals and product documents.
To Next Page
