ABB FENA-01 - AC;DC-Drive Object, Class 2 Ah; Class Attributes (Instance #0)

224 EtherNet/IP – Communication protocol
 AC/DC-drive object, class 2Ah
The AC/DC-drive object can only be used if the ODVA AC/DC drive
profile is in use.
The object models the functions specific to an AC or DC Drive.
Class attributes (Instance
#0)
14 Warning
Code
Get Code word indicating the
warning present. If multiple
warnings are present, the
lowest code value is
displayed. DRIVECOMM
codes are reported. See the
drive manual for further
information on DRIVECOMM
codes.
UINT16
15 CtlFromNet Get 0 = NetControl disabled
1 = NetControl enabled
BOOL
16 DNFaultMode Get, Set 2 = Vendor specified UINT8
17 ForceFault Get, Set 0 → 1 forces the drive to fault BOOL
# Attribute
name
Services Description Data
type
1 Revision Get Revision of the CIP Object
Class Definition upon which
the implementation is based
Array of
UINT8
# Attribute
name
Services Description Data
type