Communication
107
Table 14. PROFIdrive Parameter Request error codes
0x44 Error
0x45 … 0xFF (Reserved)
Error # Meaning Used at
00h Impermissible parameter
number
Access to unavailable parameter
01h Parameter value cannot be
changed
Change access to a parameter value
that cannot be changed
02h Low or high limit exceeded Change access with value outside the
limits
03h Invalid subindex Access to unavailable subindex
04h No array Access with subindex to non-indexed
parameter
05h Incorrect data type Change access with value that does
not match the data type of the
parameter
06h Setting not permitted (can only
be reset)
Change access with value unequal to 0
when this is not permitted
07h Description element cannot be
changed
Change access to a description
element that cannot be changed
09h No description data available Access to unavailable description
(parameter value is available)
0Bh No operation priority Change access rights without rights to
change parameters
0Fh No text array available Access to text array that is not available
(parameter value is available)
11h Request cannot be executed
because of operating mode
Access is temporarily not possible for
reasons that are not specified in detail
14h Value impermissible Change access with a value that is
within limits but is not permissible for
other long-term reasons (parameter
with defined single values)
To Next Page
Loading...
Need help?
General
