ABB FENA-11 - Class Attributes (Instance #0); TCP;IP Interface Object, Class F5 H

EtherNet/IP – Communication protocol 233
 TCP/IP interface object, class F5h
This object provides the mechanism to configure the TCP/IP
network interface of the device.
Class attributes (Instance #0)
Instance attributes (Instance #1)
# Attribute name Services Description Data
type
1 Revision Get Revision of the TCP/IP
Interface Object Class
Definition upon which the
implementation is based
Array of
UINT8
# Attribute name Services Description Data
type
1 Interface Status Get See Interface Status
attribute (#1) bits on page
234.
DWORD
2 Configuration
Capability
Get See Configuration
Capability attribute (#2)
bits on page 235.
DWORD
3 Configuration
Control
Get See Configuration Control
attribute (#3) bits on page
236.
DWORD
4 Physical Link
Object
Get Path to physical link object STRUCT
of:
Path Size Path size UINT
Path Logical segments
identifying the physical link
object
Padded
EPATH