ABB RETA-01 - Configuration Object, Class 0 X92

Communication
76
Instance 0x02 (Assembly instance 103 parameters), Attributes
Note: Input and Output attributes can also be accessed with
RETA-01 configuration parameters 19-26.
Configuration Object, Class 0x92
This object is used to set the Idle action in ABB Drives profile.
Most Ethernet/IP masters implement the Run/Idle header and this
class was created to be able to define the drive behaviour in Idle
mode. (RETA-01 version 2.05 onwards)
Services
Class Attributes
ID# Attribute name Dflt,Min,Max Description
0x01 Input I/O parameter 1 0,0,32767 UINT16
0x02 Input I/O parameter 2 0,0,32767 UINT16
0x03 Input I/O parameter 3 0,0,32767 UINT16
0x04 Input I/O parameter 4 0,0,32767 UINT16
…
0x20 Input I/O parameter 32 0,0,32767 UINT16
Class services: Get Attribute Single
Instance services: Get Attribute Single
Set Attribute Single
# Name Services Description Dflt,Min,Max Data type
0x01 Revision Get Revision 2 0x0002 UINT