ABB A130-H Series User Manual

Operation Manual / A130-H.. - A140-H..
9 Dismantling and fitting / 9.7 Pressing off the casing
© Copyright 2021 ABB. All rights reserved. HZTL4030_EN Rev.G July 2021
9.7 Pressing off the casing
CAUTION
Axial force of the press-off tool
Using the press-off tool (90042), a high level of axial force can be generated.
If the casing is pressed off with too much force on one side, the rotor can be
damaged.
u Use the tool on both sides in alternation and make sure not to press off
too hard on either side.
Fig.41: Press off the casing
Page 88 / 122

ABB A130-H Series Specifications

General

Brand	ABB
Model	A130-H Series
Category	Industrial Equipment
Language	English