ABB A130-H Series - 9.12 Nozzle ring compression PD

Operation Manual / A130-H.. - A140-H..
9 Dismantling and fitting / 9.10 Installing the cartridge group on the
service support
© Copyright 2021 ABB. All rights reserved. HZTL4030_EN Rev.G July 2021
9.10 Installing the cartridge group on the service
support
Fig.46: Installing the cartridge group on the service support
1. Remove ring nuts(VRM).
2. Remove service support screws.
3. Fit service support(90012) according to the illustration.
4. Insert the cartridge group.
5. Fit the nuts.
Page 92 / 122