ABB A265-L59 - Fig. 46: Fitting the Nozzle Ring (A275-L and Smaller); Fitting Gas Inlet Casing, Nozzle Ring, Insulation (A275-L and Smaller); Table 33: Tightening Torque (56014)

Operation Manual / 4 Product description / A200-L
8 Disassembly and assembly / 8.9 Fitting gas inlet casing, nozzle ring,
insulation (A275-L and smaller)
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision M August 2018
8.9 Fitting gas inlet casing, nozzle ring, insulation
(A275-L and smaller)
Fitting the nozzle ring
u Coat the screw threads with high-temperature grease.
Fig.46: Fitting the nozzle ring (A275-L and smaller)
Part number A265-L A270-L A275-L
56014 M10
35Nm
M10
35Nm
M10
35Nm
Table33: Tightening torque (56014)
1. Align the notch (A
1
) with the flange connection (A
2
) and slide the nozzle ring (56001) into
the gas inlet casing (51001).
2. Fit screws (56014) with high-temperature grease and washers (56011).
Page 73 / 108