ABB A265-L59 - Fig. 43: Fitting the Nozzle Ring Holder (A280-L)

Operation Manual / 4 Product description / A200-L
8 Disassembly and assembly / 8.8 Dismantling the gas inlet casing,
nozzle ring (A280-L)
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision M August 2018
Dismantling the nozzle ring
Fig.43: Fitting the nozzle ring holder (A280-L)
1. Remove screws (B
2
).
2. Fit the nozzle ring holder (90477) with screws (B
1
) at the top of the flange of the gas inlet
casing (51001).
Page 71 / 108