Operation Manual / 4 Product description / A200-L
9 Taking a turbocharger out of operation / 9.4 Procedure with two or
more installed turbochargers
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision M August 2018
u Shut off the supply of lubricating oil to the turbocharger.
u Blank off flanges of compressor casing outlet(01), gas inlet(02) and gas outlet(03) by in-
stalling cover plates.
u Observe specifications from enginebuilder.
9.4.2 Continuing to operate the engine
Continue to operate engine in accordance with enginebuilder's instructions. Do not exceed
prescribed power reduction and maximum turbocharger speed.
Page 96 / 108
To Next Page
Loading...
