ABB A265-L59 - Page 136

Operation Manual / 4 Product description / A200-L
Tables
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision M August 2018
Tables
Table1: Related documents .......................................... 3
Table2: Weights A200-L with filter silencer.............. 8
Table3: General information about fastening the
turbocharger .................................................................. 11
Table4: Tightening torques (foot screws) .............. 12
Table5: Tightening angle (foot screws)................... 12
Table6: Lubricating oil pressure, oil inlet ................ 16
Table7: Lubricating oil temperature at the inlet .... 16
Table8: Lubricating oil temperature at the outlet. 17
Table9: Tightening torques (86505)........................ 20
Table10: Expected replacement intervals for tur-
bocharger parts............................................................. 27
Table11: Recommended replacement intervals for
turbocharger parts ....................................................... 27
Table12: Volume of water per cleaning process.... 38
Table13: Tightening torques (81125) ....................... 38
Table14: Cleaning parameters .................................. 42
Table15: Malfunctions when starting – Delayed
start-up .......................................................................... 44
Table16: Malfunctions when starting – Vibrations 44
Table17: Malfunctions when starting – Rubbing of
rotating parts................................................................ 44
Table18: Malfunctions during operation – Lubricat-
ing oil pressure too low............................................... 45
Table19: Malfunctions during operation – Drop in
speed ............................................................................. 45
Table20: Malfunctions during operation – Exhaust
gas temperature too high .......................................... 46
Table21: Malfunctions during operation – Charge air
pressure too low........................................................... 46
Table22: Malfunctions during operation – Charge air
pressure too high ......................................................... 47
Table23: Surging of the turbocharger..................... 47
Table24: Malfunctions when stopping – Runout
noises.............................................................................. 48
Table25: Malfunctions when stopping – Shortened
runout time.................................................................... 48
Table26: Malfunctions of the speed measurement
system ............................................................................ 49
Table27: Weights of assemblies [kg] ........................ 52
Table28: Weight of wall insert [kg]............................ 52
Table29: Tightening torques (filter silencer screws)..
57
Table30: Admissible axial clearance A ...................... 64
Table31: Maximum admissible loosening torque
(51087) ............................................................................. 67
Table32: Maximum admissible loosening torque
(51087) ............................................................................. 70
Table33: Tightening torque (56014) ......................... 73
Table34: Tightening torque (61009)......................... 74
Table35: Tightening torque (51087).......................... 75
Table36: Tightening torque (56014) ......................... 78
Table37: Tightening torque (61009) ......................... 79
Table38: Tightening torque (51087) ......................... 80
Table39: Admissible axial clearance A ...................... 81
Table40: Tightening torque (77015) ......................... 82
Table41: Tightening torque (72011) .......................... 84
Table42: Tightening torque (72004)......................... 85
Table43: Tightening torque (72004)......................... 86
Table44: Overview of tightening torques................ 89
Table45: Tightening torque, insulation.................... 89
Table46: Procedure for taking out of operation .... 90
Table47: Tightening torques (locking device) ........ 93
Table48: Required washers (01) ................................ 94
Table49: Tightening torque (57005)......................... 94
Table50: Customer spare part set (97070) ........... 101
Table51: Turbocharger with part numbers............ 103
Table52: Cartridge group with part numbers....... 105
Page 108 / 108Page 108 / 108