Table 117. Measurement
Function Name IEC 61850 Name Number of Instances
Three-phase current measurement CMMXU 20
Sequence current measurement CSMSQI 20
Residual current measurement RESCMMXU 20
Three-phase voltage measurement VMMXU 4
Residual voltage measurement RESVMMXU 4
Sequence voltage measurement VSMSQI 4
Three-phase power and energy measure-
ment
PEMMXU 20
Load prole LDPRLRC 20
Frequency measurement for 4 bus sections FMMXU 4
Table 118. Traditional LED indication
Function Name IEC 61850 Name
Number of Instances
LED indication control LEDPTRC 1
Table 119. Logging functions
Function Name IEC 61850 Name Number of Instances
Disturbance recorder RDRE 1
Fault recorder FLTRFRC 1
Table 120. Other functionality
Function Name IEC 61850 Name Number of Instances
OR-gate with two inputs OR2 800
OR-gate with six inputs OR6 400
OR-gate with twenty inputs OR20 200
AND-gate with two inputs AND2 800
AND-gate with six inputs AND6 400
AND-gate with twenty inputs AND20 200
XOR-gate with two inputs XOR2 200
Negation-gate NOT 400
Selects the highest analogue value
out of the three inputs
MAX3 200
Selects the lowest analogue value
out of the three inputs
MIN3 200
Gives a pulse out of the detected
rising edge in the input
R_TRIG 100
Gives a pulse out of the detected
falling edge in the input
F_TRIG 100
SWITCHR-function SWITCHR 600
SR ip-op, non volatile SR 200
Minimum pulse timer, two channel TPGAPC 80
Minimum pulse timer seconds
resolution, two channel
TPSGAPC 20
Minimum pulse timer minutes
resolution, two channel
TPMGAPC 20
Pulse timer, eight channel PTGAPC 40
Time delay off, eight channel TOFGAPC 80
Time delay on, eight channel TONGAPC 80
SR ip-op, eight channel with
volatile memory
SRGAPC 80
Move, eight channel MVGAPC 40