ABB AC 800M

Appendix A Names and Abbreviations Standard Library Parameters
3BSE042835-600 115
In addition, the following abbreviations are recognized:
InteractionPar A parameter of type ObjectNamePar. The components are all
the parameters that the operator can interact with via
interaction objects. Via this parameter, all operator
parameters are available in the surrounding program.
Period (FB) Time interval between consecutive operations.
RemoteSystem The address of a remote system.
Table 19. Object name suffixes.
Full name Short name Remark
ControlConnection CC Used as suffix on all modules that have a
parameter of the data type ControlConnection.
For example: PidCC.
Control Module M A control module type that has the same
functionality as an existing function block type
shall have the same name as that function block
type plus the suffix “M” (for Control Module
type). For Example:
AlarmCond – Fu
nction block type
AlarmCondM – Control module type
Diagram D A diagram type that has the same functionality
as an existing function block type or control
module type shall have the same name as that
function block type or control module plus the
suffix "D" (for Diagram type). For Example:
RemoteInput Control module type and
RemoteInputD Diagram type
Temp la t e Temp la te Only for object types that the user must change
and rename before use. For example:
EquipProcedureTemplate
Table 18. Certain parameters and their descriptions used in standard libraries.