ABB ACA 6 Series - By Fork-Lift; By Split Rollers

Chapter 2 – Mechanical Installation
2-4 ACA 6xx Sections and ACS/ACC 6x7 (132 to 3000 kW) Frequency Converters
by Fork-lift
by Split Rollers (Not allowed in marine versions)
The centre of gravity may be quite high. Be
therefore careful when transporting the shipping
splits. Tilting of the cabinets must be avoided.
Moving of the shipping split is to be done only
with the cabinets upright.
Remove the bottom wooden frame
which is part of the shipment.
Lay the shipping split on the rollers and
move the unit carefully until it is close
to its final location.
Remove the rollers by lifting the
shipping split using a crane or fork-lift
truck as described above.