Chapter 3 – Electrical Installation
ACA 6xx Sections and ACS/ACC 6x7 (132 to 3000 kW) Frequency Converters 3-5
Optical Cable When cutting the cable, for example with cutters, the optical cable ends
become rough and may cause damping in the cable; the cable ends,
therefore, should be ground with fine sand-paper.
Relay Cable The cable type with braided metallic screen (e.g. ÖLFLEX
LAPPKABEL, Germany) has been tested and approved by ABB
Industry.
Control Panel Cable In remote use, the cable connecting the Control Panel to the ACx 600
must not exceed 3 metres. The cable type tested and approved by
ABB Industry is used in Control Panel option kits.
To Next Page
Loading...
