1-192 ACH550-UH User’s Manual
Embedded fieldbus
Note: After any changes to the communication settings, protocol must be
reactivated by either cycling the drive power, or by setting parameter 5302
EFB
STATION ID to 0 and then restoring the station ID (5302) or use Reinitialize Device
Service.
5317 EFB PAR17 This parameter works
with parameter 5311 to
set BACnet Device
Object Instance IDs. See
parameter 5311.
Code Description
EFB Protocol Reference
Modbus N2 FLN BACnet
To Next Page
Loading...
