2-76 ACH550 E-Clipse Bypass User’s Manual
Parameters
5004 EFB PARITY 1 0=8 NONE 1,
1=8 NONE 2,
2=8 EVEN 1,
3=8 ODD 1
0 Read-only copy from Group 53.
5005 PROFILE 1 0=ABB DRV LIM,
1=DCU PROFILE,
2=ABB DRV FULL
0 Read-only copy from Group 53.
5006 BP OK MSG 1 0 - 65535 0 Contains a count of valid
messages received by the
bypass.
• During normal operation, this
counter is increasing
constantly.
5007 BP CRC ERR 1 0 - 65535 0 Contains a count of the
messages with a CRC error
received by the bypass.
5008 UART
ERROR
1 0 - 65535 0 Read-only copy from Group 53.
5009 BP STATUS 1 0=IDLE,
1=EXECUT INIT,
2=TIME OUT,
3=CONFIG ERR,
4=OFF-LINE,
5=ON-LINE,
6=RESET,
7=LISTEN ONLY
0 Contains the staus of the bypass
EFB protocol.
5010
...
5018
BP PAR 10
...
BP PAR 18
1 0 - 65535 0
5019
...
5020
BP PAR 19
...
BP PAR 20
hex 0x0000 - 0xFFFF 0x0000
Group 50: Bypass EFB
Code Name Resolution Range Default Description
To Next Page
Loading...
