ABB ACH580-01 - Power Wiring Torque for Frames R1-R2

32 EN – R0…R4 Quick installation guide
R0-
R4
R5
R6-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH
Install optional modules, if any
See chapter Electrical installation in ACH580-01 (0.75 to 250 kW) hardware manual
(3AUA0000076331 [English]).
Reinstall cover
See figure I on page 168.
1. Put the tabs on the inside of the cover top in their counterparts on the housing
(1a) and then press the cover at the bottom (1b).
2. Tighten the retaining screw with a screwdriver.
For start-up instructions, see chapter EN – Quick start-up guide on page 321.