ACH580 E-Clipse bypass and packaged drive user manual 33
Start-up
Note: In the Parameter Edit mode the current parameter value appears below the
parameter name.
Note: To view the default parameter value, press the Up/Down arrows
simultaneously. Press Enter to restore the default parameter value or press ESC to
leave the Parameter Edit mode.
6 Press the Up/Down arrows to change
the Parameter Value.
7 Press ENTER to store the modified
value or press ESC to leave the
Parameter Edit mode.
or
8 Press ESC to return to the listing of
Parameter Groups, and again to
return to the Main Menu.
9 Press ESC to return to the Default
Display from the Main Menu.
To Next Page
Loading...
