ABB ACQ580 Quick Start Up Guide

Parameter 95.01 displays the supply voltage selected
manually.
Go back to the Main menu by pressing (Back) re-
peatedly.
In the Main menu, select First start assistant and press
(Select) to enter the First start assistant menu.
Continue with the following steps for commissioning the
ACQ580.
Start-up with the First start assistant
Have the motor name plate data at hand.
Power up the drive.
Select the language you want to use by highlighting it (if not
already highlighted) and pressing (OK).
Note:
After you have selected the language, it takes a few minutes
to download the language file to the control panel.
The First start assistant guides you through the first start-up.
The assistant begins automatically. Wait until the control
panel enters the view shown on the right.
Select Start set-up and press (Next).
6 EN – Quick start-up guide
EN
CS
DE
ES
FI
FR
IT
PT
RU
SV
TR

ABB ACQ580 Specifications

General

Protection class	IP21, IP55
Ambient temperature range	-15°C to +50°C
Communication protocols	Modbus RTU
Mounting type	Wall mounted
Control method	vector control
Frequency range	0 Hz to 500 Hz
Protection features	Overcurrent, overvoltage, undervoltage, short circuit